Contains all definitions exposed by ADL for Linux and Windows(XP, Vista and above); 32bit and 64bit platforms.
Included in ADL SDK
More...
|
#define | ADL_8BIT_GREYSCALE_SUPPORTED (1 << 9) |
| This value indicates that the workstation supports 8-Bit Grayscale. More...
|
|
#define | ADL_ADAPTER_CONFIGMEMORY_DBD (1 << 0) |
|
#define | ADL_ADAPTER_CONFIGMEMORY_ENHANCEDVSYNC (1 << 4) |
| If this bit is set, it indicates that the tear free vsync is set on the display. More...
|
|
#define | ADL_ADAPTER_CONFIGMEMORY_ROTATE (1 << 1) |
| If this bit is set, it indicates that the display is rotated (90, 180 or 270) More...
|
|
#define | ADL_ADAPTER_CONFIGMEMORY_STEREO_ACTIVE (1 << 3) |
| If this bit is set, it indicates that the active stereo is set on the display. More...
|
|
#define | ADL_ADAPTER_CONFIGMEMORY_STEREO_PASSIVE (1 << 2) |
| If this bit is set, it indicates that passive stereo is set on the display. More...
|
|
#define | ADL_ADAPTER_CONFIGMEMORY_TEARFREEVSYNC (1 << 4) |
|
#define | ADL_ADAPTER_DISPLAYCAP_BEZEL_SUPPORTED 0x00000200 |
|
#define | ADL_ADAPTER_DISPLAYCAP_MANNER_SUPPORTED_2HSTRETCH 0x00000040 |
|
#define | ADL_ADAPTER_DISPLAYCAP_MANNER_SUPPORTED_2VSTRETCH 0x00000020 |
| Legacy support for XP. More...
|
|
#define | ADL_ADAPTER_DISPLAYCAP_MANNER_SUPPORTED_CLONE 0x00000004 |
|
#define | ADL_ADAPTER_DISPLAYCAP_MANNER_SUPPORTED_EXTENDED 0x00000080 |
|
#define | ADL_ADAPTER_DISPLAYCAP_MANNER_SUPPORTED_NOTACTIVE 0x00000001 |
|
#define | ADL_ADAPTER_DISPLAYCAP_MANNER_SUPPORTED_NSTRETCH1GPU 0x00000008 |
|
#define | ADL_ADAPTER_DISPLAYCAP_MANNER_SUPPORTED_NSTRETCHNGPU 0x00000010 |
|
#define | ADL_ADAPTER_DISPLAYCAP_MANNER_SUPPORTED_SINGLE 0x00000002 |
|
#define | ADL_ADAPTER_DISPLAYCAP_PREFERDISPLAY_SUPPORTED 0x00000100 |
|
#define | ADL_ADAPTER_MAX_CONNECTORS 10 |
| Indicates the Maximum supported connectors on slot. More...
|
|
#define | ADL_ADAPTER_MAX_SLOTS 4 |
|
#define | ADL_ADAPTER_SPEEDCAPS_SUPPORTED (1 << 0) /* change asic running speed setting is supported */ |
|
#define | ADL_ADAPTER_TEAR_FREE_NOTENOUGHMEM -1 |
| Tear free desktop can't be enabled due to a lack of graphic adapter memory. More...
|
|
#define | ADL_ADAPTER_TEAR_FREE_OFF 0 |
| Tear free desktop is disabled. More...
|
|
#define | ADL_ADAPTER_TEAR_FREE_OFF_ERR_MGPUSLD -3 |
| Tear free desktop can't be enabled due to MGPU-SLS being enabled. More...
|
|
#define | ADL_ADAPTER_TEAR_FREE_OFF_ERR_QUADBUFFERSTEREO -2 |
| Tear free desktop can't be enabled due to quad buffer stereo being enabled. More...
|
|
#define | ADL_ADAPTER_TEAR_FREE_ON 1 |
|
#define | ADL_ADAPTERCONFIGSTATE_ANCILLARY_RENDER ( 1 << 1 ) |
|
#define | ADL_ADAPTERCONFIGSTATE_HEADLESS ( 1 << 2 ) |
|
#define | ADL_ADAPTERCONFIGSTATE_REQUISITE_RENDER ( 1 << 0 ) |
|
#define | ADL_ADAPTERCONFIGSTATE_SCATTERGATHER ( 1 << 4 ) |
| Indicates that scatter gather feature enabled on the adapter. More...
|
|
#define | ADL_APP_PROFILE_FILENAME_LENGTH 256 |
|
#define | ADL_APP_PROFILE_PROPERTY_LENGTH 64 |
|
#define | ADL_APP_PROFILE_TIMESTAMP_LENGTH 32 |
|
#define | ADL_APP_PROFILE_VERSION_LENGTH 32 |
|
#define | ADL_APPLY_DEGAMMA (1 << 5) |
| Used for struct ADLRegamma. If the gamma ramp flag is used then the driver could apply de gamma corretion to the supplied curve and this depends on this flag. More...
|
|
#define | ADL_ASIC_DISCRETE (1 << 0) |
|
#define | ADL_ASIC_EMBEDDED (1 << 7) |
|
#define | ADL_ASIC_FIREGL ADL_ASIC_WORKSTATION |
|
#define | ADL_ASIC_FIREMV (1 << 3) |
|
#define | ADL_ASIC_FIRESTREAM (1 << 6) |
|
#define | ADL_ASIC_FUSION (1 << 5) |
|
#define | ADL_ASIC_INTEGRATED (1 << 1) |
|
#define | ADL_ASIC_UNDEFINED 0 |
|
#define | ADL_ASIC_WORKSTATION (1 << 2) |
|
#define | ADL_ASIC_XGP (1 << 4) |
|
#define | ADL_BLAYOUT_VALID_CONNECTOR_LENGTHS 0x8 |
| Indicates the connector lengths is valid. More...
|
|
#define | ADL_BLAYOUT_VALID_CONNECTOR_OFFSETS 0x4 |
| Indicates the connector offsets are valid. More...
|
|
#define | ADL_BLAYOUT_VALID_NUMBER_OF_SLOTS 0x1 |
|
#define | ADL_BLAYOUT_VALID_SLOT_SIZES 0x2 |
| Indicates the slot sizes are valid. Size of the slot consists of the length and width. More...
|
|
#define | ADL_COLOR_DEPTH_DEF ADL_COLORDEPTH_888 |
| Indicates default value of color depth. More...
|
|
#define | ADL_COLORDEPTH_101010 3 |
| Indicates if color depth is 101010. More...
|
|
#define | ADL_COLORDEPTH_121212 4 |
| Indicates if color depth is 121212. More...
|
|
#define | ADL_COLORDEPTH_141414 5 |
| Indicates if color depth is 141414. More...
|
|
#define | ADL_COLORDEPTH_161616 6 |
| Indicates if color depth is 161616. More...
|
|
#define | ADL_COLORDEPTH_666 1 |
| Indicates if color depth is 666. More...
|
|
#define | ADL_COLORDEPTH_888 2 |
| Indicates if color depth is 888. More...
|
|
#define | ADL_COLORDEPTH_UNKNOWN 0 |
|
#define | ADL_CONNECTION_BITMAST_FROM_INDEX(index) (1 << index) |
| Macros for generating bitmask from index. More...
|
|
#define | ADL_CONNECTION_PROPERTY_3DCAPS 0x4 |
| Indicates the property 3D caps is valid. More...
|
|
#define | ADL_CONNECTION_PROPERTY_BITRATE 0x1 |
|
#define | ADL_CONNECTION_PROPERTY_COLORDEPTH 0x10 |
| Indicates the property colordepth is valid. More...
|
|
#define | ADL_CONNECTION_PROPERTY_NUMBER_OF_LANES 0x2 |
| Indicates the property number of lanes is valid. More...
|
|
#define | ADL_CONNECTION_PROPERTY_OUTPUT_BANDWIDTH 0x8 |
| Indicates the property output bandwidth is valid. More...
|
|
#define | ADL_CONNECTION_TYPE_ACTIVE_DONGLE 12 |
| Indicates the active dongle, all types. More...
|
|
#define | ADL_CONNECTION_TYPE_ACTIVE_DONGLE_DP_DVI_DL 6 |
| Indicates the Active dongle DP->DVI(double link) connection type is valid. More...
|
|
#define | ADL_CONNECTION_TYPE_ACTIVE_DONGLE_DP_DVI_SL 5 |
| Indicates the Active dongle DP->DVI(single link) connection type is valid. More...
|
|
#define | ADL_CONNECTION_TYPE_ACTIVE_DONGLE_DP_HDMI 7 |
| Indicates the Active dongle DP->HDMI connection type is valid. More...
|
|
#define | ADL_CONNECTION_TYPE_ACTIVE_DONGLE_DP_VGA 8 |
| Indicates the Active dongle DP->VGA connection type is valid. More...
|
|
#define | ADL_CONNECTION_TYPE_DISPLAY_PORT 4 |
| Indicates the DISPLAY PORT connection type is valid. More...
|
|
#define | ADL_CONNECTION_TYPE_DVI 1 |
| Indicates the DVI_I connection type is valid. More...
|
|
#define | ADL_CONNECTION_TYPE_DVI_SL 2 |
| Indicates the DVI_SL connection type is valid. More...
|
|
#define | ADL_CONNECTION_TYPE_HDMI 3 |
| Indicates the HDMI connection type is valid. More...
|
|
#define | ADL_CONNECTION_TYPE_MST 11 |
| Indicates the MST type is valid. More...
|
|
#define | ADL_CONNECTION_TYPE_PASSIVE_DONGLE_DP_DVI 10 |
| Indicates the Active dongle DP->VGA connection type is valid. More...
|
|
#define | ADL_CONNECTION_TYPE_PASSIVE_DONGLE_DP_HDMI 9 |
| Indicates the Passive dongle DP->HDMI connection type is valid. More...
|
|
#define | ADL_CONNECTION_TYPE_VGA 0 |
|
#define | ADL_CONNECTION_TYPE_VIRTUAL 13 |
| Indicates the Virtual Connection Type. More...
|
|
#define | ADL_CONNECTOR_TYPE_ATICVDONGLE_JP 5 |
| Indicates Active Dongle-JP Connector type. More...
|
|
#define | ADL_CONNECTOR_TYPE_ATICVDONGLE_NA 4 |
| Indicates Active Dongle-NA Connector type. More...
|
|
#define | ADL_CONNECTOR_TYPE_ATICVDONGLE_NONI2C 6 |
| Indicates Active Dongle-NONI2C Connector type. More...
|
|
#define | ADL_CONNECTOR_TYPE_ATICVDONGLE_NONI2C_D 7 |
| Indicates Active Dongle-NONI2C-D Connector type. More...
|
|
#define | ADL_CONNECTOR_TYPE_DISPLAYPORT 10 |
| Indicates Display port Connector type. More...
|
|
#define | ADL_CONNECTOR_TYPE_DVI_D 2 |
| Indicates DVI-D Connector type. More...
|
|
#define | ADL_CONNECTOR_TYPE_DVI_I 3 |
| Indicates DVI-I Connector type. More...
|
|
#define | ADL_CONNECTOR_TYPE_EDP 11 |
| Indicates EDP Connector type. More...
|
|
#define | ADL_CONNECTOR_TYPE_HDMI_TYPE_A 8 |
| Indicates HDMI-Type A Connector type. More...
|
|
#define | ADL_CONNECTOR_TYPE_HDMI_TYPE_B 9 |
| Indicates HDMI-Type B Connector type. More...
|
|
#define | ADL_CONNECTOR_TYPE_MINI_DISPLAYPORT 12 |
| Indicates MiniDP Connector type. More...
|
|
#define | ADL_CONNECTOR_TYPE_UNKNOWN 0 |
|
#define | ADL_CONNECTOR_TYPE_USB_TYPE_C 14 |
| Indicates USB type C Connector type. More...
|
|
#define | ADL_CONNECTOR_TYPE_VGA 1 |
| Indicates VGA Connector type. More...
|
|
#define | ADL_CONNECTOR_TYPE_VIRTUAL 13 |
| Indicates Virtual Connector type. More...
|
|
#define | ADL_CONNPROP_S3D_ALTERNATE_TO_FRAME_PACK 0x00000001 |
|
#define | ADL_CONTEXT_SPEED_FORCEHIGH 1 /* asic running speed is forced to high */ |
|
#define | ADL_CONTEXT_SPEED_FORCELOW 2 /* asic running speed is forced to low */ |
|
#define | ADL_CONTEXT_SPEED_UNFORCED 0 /* default asic running speed */ |
|
#define | ADL_CONTROLLERMODE_CM_MODIFIER_VIEW_PANLOCK 0x00000002 |
| Indicate that the viewport set will change the view PanLock. More...
|
|
#define | ADL_CONTROLLERMODE_CM_MODIFIER_VIEW_POSITION 0x00000001 |
|
#define | ADL_CONTROLLERMODE_CM_MODIFIER_VIEW_SIZE 0x00000008 |
| Indicate that the viewport set will change the view size. More...
|
|
#define | ADL_CONTROLLERVECTOR_0 1 |
|
#define | ADL_CONTROLLERVECTOR_1 2 |
|
#define | ADL_CROSSDISPLAY_OPTION_FORCESWITCH (1 << 0) |
| Force switching without checking for running 3D applications. More...
|
|
#define | ADL_CROSSDISPLAY_OPTION_NONE 0 |
|
#define | ADL_CROSSDISPLAY_PLATFORM (1 << 0) |
|
#define | ADL_CROSSDISPLAY_PLATFORM_DOCKSTATION (1 << 2) |
| CROSSDISPLAY platform for docking station. More...
|
|
#define | ADL_CROSSDISPLAY_PLATFORM_LASSO (1 << 1) |
| CROSSDISPLAY platform for Lasso station. More...
|
|
#define | ADL_CROSSGPUDISPLAYCLONE 0x2 |
| Indicates there is crossGPU clone. More...
|
|
#define | ADL_CROSSGPUDISPLAYCLONE_AMD_WITH_NONAMD 0x1 |
|
#define | ADL_CS_ADOBE 0x0010 |
| Adobe RGB. More...
|
|
#define | ADL_CS_APP_CONTROL 0x0100 |
| Application Controlled. More...
|
|
#define | ADL_CS_BT2020 0x0008 |
| BT.2020. More...
|
|
#define | ADL_CS_BT601 0x0002 |
| BT.601. More...
|
|
#define | ADL_CS_BT709 0x0004 |
| BT.709. More...
|
|
#define | ADL_CS_DISPLAY_NATIVE 0x0080 |
| Display Native. More...
|
|
#define | ADL_CS_DOLBYVISION 0x0200 |
| DolbyVision. More...
|
|
#define | ADL_CS_P3 0x0020 |
| DCI-P3. More...
|
|
#define | ADL_CS_scRGB_MS_REF 0x0040 |
| scRGB (MS Reference) More...
|
|
#define | ADL_CS_sRGB 0x0001 |
| sRGB More...
|
|
#define | ADL_CUSTOM_GAMUT (1 << 1) |
|
#define | ADL_CUSTOM_TIMING_SUPPORTED (1 << 10) |
| This value indicates that the workstation supports CUSTOM TIMING. More...
|
|
#define | ADL_CUSTOM_WHITE_POINT (1 << 0) |
| The flags are used to describe the source of gamut and how read information from struct ADLGamutData. More...
|
|
#define | ADL_CUSTOMIZEDMODEFLAG_BASEMODE (1 << 4) |
|
#define | ADL_CUSTOMIZEDMODEFLAG_INSERTBYDRIVER (1 << 2) |
|
#define | ADL_CUSTOMIZEDMODEFLAG_INTERLACED (1 << 3) |
|
#define | ADL_CUSTOMIZEDMODEFLAG_MODESUPPORTED (1 << 0) |
|
#define | ADL_CUSTOMIZEDMODEFLAG_NOTDELETETABLE (1 << 1) |
|
#define | ADL_DEEPBITDEPTH_10BPP_AUTO 1 |
|
#define | ADL_DEEPBITDEPTH_10BPP_FORCEON 2 |
|
#define | ADL_DEEPBITDEPTH_10BPP_SUPPORTED (1 << 5) |
| This value indicates that the workstation card supports DeepBitDepth (10 bpp) More...
|
|
#define | ADL_DEEPBITDEPTH_FORCEOFF 0 |
| defines for ADL_Workstation_DeepBitDepth_Get and ADL_Workstation_DeepBitDepth_Set functions More...
|
|
#define | ADL_DESKTOPCONFIG_BIGDESK_H (1 << 4) /* Big Desktop Horizontal */ |
|
#define | ADL_DESKTOPCONFIG_BIGDESK_HR (1 << 6) /* Big Desktop Reverse Horz */ |
|
#define | ADL_DESKTOPCONFIG_BIGDESK_V (1 << 5) /* Big Desktop Vertical */ |
|
#define | ADL_DESKTOPCONFIG_BIGDESK_VR (1 << 7) /* Big Desktop Reverse Vert */ |
|
#define | ADL_DESKTOPCONFIG_CLONE (1 << 2) /* Clone */ |
|
#define | ADL_DESKTOPCONFIG_RANDR12 (1 << 8) /* RandR 1.2 Multi-display */ |
|
#define | ADL_DESKTOPCONFIG_SINGLE (1 << 0) /* Single */ |
|
#define | ADL_DESKTOPCONFIG_UNKNOWN 0 /* UNKNOWN desktop config */ |
|
#define | ADL_DISPLAY_ADJUST_HOR_POS (1 << 2) |
|
#define | ADL_DISPLAY_ADJUST_HOR_SIZE (1 << 4) |
|
#define | ADL_DISPLAY_ADJUST_OVERSCAN (1 << 0) |
|
#define | ADL_DISPLAY_ADJUST_SIZEPOS (ADL_DISPLAY_ADJUST_VERT_POS | ADL_DISPLAY_ADJUST_HOR_POS | ADL_DISPLAY_ADJUST_VERT_SIZE | ADL_DISPLAY_ADJUST_HOR_SIZE) |
|
#define | ADL_DISPLAY_ADJUST_UNDERSCAN (1<<6) |
|
#define | ADL_DISPLAY_ADJUST_VERT_POS (1 << 1) |
|
#define | ADL_DISPLAY_ADJUST_VERT_SIZE (1 << 3) |
|
#define | ADL_DISPLAY_BEZELOFFSET_COMMIT 0x00000008 |
|
#define | ADL_DISPLAY_BEZELOFFSET_STEPBYSTEPSET 0x00000004 |
| For Bezel. More...
|
|
#define | ADL_DISPLAY_CAPS_DOWNSCALE (1 << 0) |
| Down-scale support. More...
|
|
#define | ADL_DISPLAY_CAPS_SHARPNESS (1 << 0) |
| Sharpness support. More...
|
|
#define | ADL_DISPLAY_COLOR_BRIGHTNESS (1 << 0) |
|
#define | ADL_DISPLAY_COLOR_CONTRAST (1 << 1) |
|
#define | ADL_DISPLAY_COLOR_HUE (1 << 3) |
|
#define | ADL_DISPLAY_COLOR_SATURATION (1 << 2) |
|
#define | ADL_DISPLAY_COLOR_TEMPERATURE (1 << 4) |
|
#define | ADL_DISPLAY_COLOR_TEMPERATURE_SOURCE_EDID (1 << 5) |
| Color Temperature Source is EDID. More...
|
|
#define | ADL_DISPLAY_COLOR_TEMPERATURE_SOURCE_USER (1 << 6) |
| Color Temperature Source is User. More...
|
|
#define | ADL_DISPLAY_CONTYPE_ATICVDONGLE_JPN 5 |
|
#define | ADL_DISPLAY_CONTYPE_ATICVDONGLE_NONI2C_JPN 6 |
|
#define | ADL_DISPLAY_CONTYPE_ATICVDONGLE_NONI2C_NTSC 7 |
|
#define | ADL_DISPLAY_CONTYPE_ATICVDONGLE_NTSC 4 |
|
#define | ADL_DISPLAY_CONTYPE_COMPOSITE 13 |
|
#define | ADL_DISPLAY_CONTYPE_DISPLAYPORT 15 |
|
#define | ADL_DISPLAY_CONTYPE_DVI_D 2 |
|
#define | ADL_DISPLAY_CONTYPE_DVI_I 3 |
|
#define | ADL_DISPLAY_CONTYPE_EDP 16 |
|
#define | ADL_DISPLAY_CONTYPE_HDMI_TYPE_A 10 |
|
#define | ADL_DISPLAY_CONTYPE_HDMI_TYPE_B 11 |
|
#define | ADL_DISPLAY_CONTYPE_PROPRIETARY 8 |
|
#define | ADL_DISPLAY_CONTYPE_RCA_3COMPONENT 14 |
|
#define | ADL_DISPLAY_CONTYPE_SVIDEO 12 |
|
#define | ADL_DISPLAY_CONTYPE_UNKNOWN 0 |
|
#define | ADL_DISPLAY_CONTYPE_USB_TYPE_C 18 |
|
#define | ADL_DISPLAY_CONTYPE_VGA 1 |
|
#define | ADL_DISPLAY_CONTYPE_WIRELESSDISPLAY 17 |
|
#define | ADL_DISPLAY_CUSTOMMODES (1<<5) |
|
#define | ADL_DISPLAY_CV_DONGLE_1080I (1 << 4) |
|
#define | ADL_DISPLAY_CV_DONGLE_1080I25 (1 << 8) |
|
#define | ADL_DISPLAY_CV_DONGLE_1080P (1 << 5) |
|
#define | ADL_DISPLAY_CV_DONGLE_1080P24 (1 << 11) |
|
#define | ADL_DISPLAY_CV_DONGLE_1080P25 (1 << 12) |
|
#define | ADL_DISPLAY_CV_DONGLE_1080P30 (1 << 13) |
|
#define | ADL_DISPLAY_CV_DONGLE_1080P50 (1 << 14) |
|
#define | ADL_DISPLAY_CV_DONGLE_16_9 (1 << 6) |
|
#define | ADL_DISPLAY_CV_DONGLE_480I (1 << 0) |
| The following is applicable to ADL_DISPLAY_CONTYPE_ATICVDONGLE_NA and ADL_DISPLAY_CONTYPE_ATICVDONGLE_NONI2C only. More...
|
|
#define | ADL_DISPLAY_CV_DONGLE_480P (1 << 1) |
|
#define | ADL_DISPLAY_CV_DONGLE_540P (1 << 2) |
|
#define | ADL_DISPLAY_CV_DONGLE_576I25 (1 << 9) |
|
#define | ADL_DISPLAY_CV_DONGLE_576P50 (1 << 10) |
|
#define | ADL_DISPLAY_CV_DONGLE_720P (1 << 3) |
|
#define | ADL_DISPLAY_CV_DONGLE_720P50 (1 << 7) |
|
#define | ADL_DISPLAY_CV_DONGLE_D1 (1 << 0) |
|
#define | ADL_DISPLAY_CV_DONGLE_D2 (1 << 1) |
|
#define | ADL_DISPLAY_CV_DONGLE_D3 (1 << 2) |
|
#define | ADL_DISPLAY_CV_DONGLE_D4 (1 << 3) |
|
#define | ADL_DISPLAY_CV_DONGLE_D5 (1 << 4) |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_RGB101010 0x00000008L |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_RGB161616 0x00000010L |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_RGB656 0x00000001L |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_RGB666 0x00000002L |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_RGB888 0x00000004L |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_RGB_RESERVED1 0x00000020L |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_RGB_RESERVED2 0x00000040L |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_RGB_RESERVED3 0x00000080L |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_XRGB_BIAS101010 0x00000100L |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_YCBCR420_10BPCC 0x00010000L |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_YCBCR420_12BPCC 0x00020000L |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_YCBCR420_8BPCC 0x00008000L |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_YCBCR422_10BPCC 0x00002000L |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_YCBCR422_12BPCC 0x00004000L |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_YCBCR422_8BPCC 0x00001000L |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_YCBCR444_10BPCC 0x00000400L |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_YCBCR444_12BPCC 0x00000800L |
|
#define | ADL_DISPLAY_DDCINFO_PIXEL_FORMAT_YCBCR444_8BPCC 0x00000200L |
|
#define | ADL_DISPLAY_DISPLAYINFO_DISPLAYCONNECTED 0x00000001 |
|
#define | ADL_DISPLAY_DISPLAYINFO_DISPLAYMAPPED 0x00000002 |
|
#define | ADL_DISPLAY_DISPLAYINFO_FORCIBLESUPPORTED 0x00000008 |
|
#define | ADL_DISPLAY_DISPLAYINFO_GENLOCKSUPPORTED 0x00000010 |
|
#define | ADL_DISPLAY_DISPLAYINFO_LDA_DISPLAY 0x00000040 |
|
#define | ADL_DISPLAY_DISPLAYINFO_MANNER_SUPPORTED_2HSTRETCH 0x00000800 |
|
#define | ADL_DISPLAY_DISPLAYINFO_MANNER_SUPPORTED_2VSTRETCH 0x00000400 |
| Legacy support for XP. More...
|
|
#define | ADL_DISPLAY_DISPLAYINFO_MANNER_SUPPORTED_CLONE 0x00000200 |
|
#define | ADL_DISPLAY_DISPLAYINFO_MANNER_SUPPORTED_EXTENDED 0x00001000 |
|
#define | ADL_DISPLAY_DISPLAYINFO_MANNER_SUPPORTED_NSTRETCH1GPU 0x00010000 |
| More support manners. More...
|
|
#define | ADL_DISPLAY_DISPLAYINFO_MANNER_SUPPORTED_NSTRETCHNGPU 0x00020000 |
|
#define | ADL_DISPLAY_DISPLAYINFO_MANNER_SUPPORTED_RESERVED2 0x00040000 |
|
#define | ADL_DISPLAY_DISPLAYINFO_MANNER_SUPPORTED_RESERVED3 0x00080000 |
|
#define | ADL_DISPLAY_DISPLAYINFO_MANNER_SUPPORTED_SINGLE 0x00000100 |
|
#define | ADL_DISPLAY_DISPLAYINFO_MODETIMING_OVERRIDESSUPPORTED 0x00000080 |
|
#define | ADL_DISPLAY_DISPLAYINFO_MULTIVPU_SUPPORTED 0x00000020 |
|
#define | ADL_DISPLAY_DISPLAYINFO_NONLOCAL 0x00000004 |
|
#define | ADL_DISPLAY_DISPLAYINFO_SHOWTYPE_PROJECTOR 0x00100000 |
| Projector display type. More...
|
|
#define | ADL_DISPLAY_DISPLAYMAP_MANNER_CLONE 0x00000008 |
|
#define | ADL_DISPLAY_DISPLAYMAP_MANNER_HSTRETCH 0x00000020 |
|
#define | ADL_DISPLAY_DISPLAYMAP_MANNER_NOTACTIVE 0x00000002 |
|
#define | ADL_DISPLAY_DISPLAYMAP_MANNER_RESERVED 0x00000001 |
|
#define | ADL_DISPLAY_DISPLAYMAP_MANNER_RESERVED1 0x00000010 |
|
#define | ADL_DISPLAY_DISPLAYMAP_MANNER_SINGLE 0x00000004 |
|
#define | ADL_DISPLAY_DISPLAYMAP_MANNER_VLD 0x00000080 |
|
#define | ADL_DISPLAY_DISPLAYMAP_MANNER_VSTRETCH 0x00000040 |
|
#define | ADL_DISPLAY_DISPLAYMAP_OPTION_GPUINFO 0x00000001 |
|
#define | ADL_DISPLAY_DISPLAYTARGET_PREFERRED 0x00000001 |
|
#define | ADL_DISPLAY_FORMAT_CVDONGLEOVERIDE 0x00000001 |
|
#define | ADL_DISPLAY_FORMAT_CVMODEUNDERSCAN 0x00000002 |
|
#define | ADL_DISPLAY_FORMAT_FORCE_1080I 0x00000002 |
|
#define | ADL_DISPLAY_FORMAT_FORCE_1080I25 0x00000010 |
|
#define | ADL_DISPLAY_FORMAT_FORCE_1080P 0x00000004 |
|
#define | ADL_DISPLAY_FORMAT_FORCE_1080P24 0x00000080 |
|
#define | ADL_DISPLAY_FORMAT_FORCE_1080P25 0x00000100 |
|
#define | ADL_DISPLAY_FORMAT_FORCE_1080P30 0x00000200 |
|
#define | ADL_DISPLAY_FORMAT_FORCE_1080P50 0x00000400 |
| Below are EXTENDED display mode flags. More...
|
|
#define | ADL_DISPLAY_FORMAT_FORCE_576I25 0x00000020 |
|
#define | ADL_DISPLAY_FORMAT_FORCE_576P50 0x00000040 |
|
#define | ADL_DISPLAY_FORMAT_FORCE_720P 0x00000001 |
|
#define | ADL_DISPLAY_FORMAT_FORCE_720P50 0x00000008 |
|
#define | ADL_DISPLAY_FORMAT_FORCECONNECT_SUPPORTED 0x00000004 |
|
#define | ADL_DISPLAY_FORMAT_FORCEMODES 0x00000020 |
|
#define | ADL_DISPLAY_FORMAT_LCDRTCCOEFF 0x00000040 |
|
#define | ADL_DISPLAY_FORMAT_RESTRICT_FORMAT_SELECTION 0x00000008 |
|
#define | ADL_DISPLAY_FORMAT_SETASPECRATIO 0x00000010 |
|
#define | ADL_DISPLAY_MODE_COLOURFORMAT_565 0x00000001 |
|
#define | ADL_DISPLAY_MODE_COLOURFORMAT_8888 0x00000002 |
|
#define | ADL_DISPLAY_MODE_INTERLACED_FLAG 2 |
|
#define | ADL_DISPLAY_MODE_ORIENTATION_SUPPORTED_000 0x00000004 |
|
#define | ADL_DISPLAY_MODE_ORIENTATION_SUPPORTED_090 0x00000008 |
|
#define | ADL_DISPLAY_MODE_ORIENTATION_SUPPORTED_180 0x00000010 |
|
#define | ADL_DISPLAY_MODE_ORIENTATION_SUPPORTED_270 0x00000020 |
|
#define | ADL_DISPLAY_MODE_PROGRESSIVE_FLAG 0 |
|
#define | ADL_DISPLAY_MODE_REFRESHRATE_ONLY 0x00000080 |
|
#define | ADL_DISPLAY_MODE_REFRESHRATE_ROUNDED 0x00000040 |
|
#define | ADL_DISPLAY_PIXELFORMAT_RGB (1 << 0) |
|
#define | ADL_DISPLAY_PIXELFORMAT_RGB_FULL_RANGE ADL_DISPLAY_PIXELFORMAT_RGB |
|
#define | ADL_DISPLAY_PIXELFORMAT_RGB_LIMITED_RANGE (1 << 3) |
|
#define | ADL_DISPLAY_PIXELFORMAT_UNKNOWN 0 |
|
#define | ADL_DISPLAY_PIXELFORMAT_YCRCB420 (1 << 4) |
|
#define | ADL_DISPLAY_PIXELFORMAT_YCRCB422 (1 << 2) |
|
#define | ADL_DISPLAY_PIXELFORMAT_YCRCB444 (1 << 1) |
|
#define | ADL_DISPLAY_POSSIBLEMAPRESULT_BEZELSUPPORTED 0x00000002 |
|
#define | ADL_DISPLAY_POSSIBLEMAPRESULT_OVERLAPSUPPORTED 0x00000004 |
|
#define | ADL_DISPLAY_POSSIBLEMAPRESULT_VALID 0x00000001 |
|
#define | ADL_DISPLAY_SLSDISPLAYOFFSET_VALID 0x0002 |
|
#define | ADL_DISPLAY_SLSGRID_CAP_OPTION_RELATIVETO_CURRENTANGLE 0x00000002 |
|
#define | ADL_DISPLAY_SLSGRID_CAP_OPTION_RELATIVETO_LANDSCAPE 0x00000001 |
|
#define | ADL_DISPLAY_SLSGRID_DESKTOPROTATION_SUPPORT 0x00000080 |
|
#define | ADL_DISPLAY_SLSGRID_DISPLAYROTATION_SUPPORT 0x00000040 |
|
#define | ADL_DISPLAY_SLSGRID_KEEPTARGETROTATION 0x00000080 |
|
#define | ADL_DISPLAY_SLSGRID_MIXMODESLS_SUPPORT 0x00000020 |
|
#define | ADL_DISPLAY_SLSGRID_ORIENTATION_000 0x00000001 |
|
#define | ADL_DISPLAY_SLSGRID_ORIENTATION_090 0x00000002 |
|
#define | ADL_DISPLAY_SLSGRID_ORIENTATION_180 0x00000004 |
|
#define | ADL_DISPLAY_SLSGRID_ORIENTATION_270 0x00000008 |
|
#define | ADL_DISPLAY_SLSGRID_PORTAIT_MODE 0x00000004 |
|
#define | ADL_DISPLAY_SLSGRID_RELATIVETO_CURRENTANGLE 0x00000020 |
|
#define | ADL_DISPLAY_SLSGRID_RELATIVETO_LANDSCAPE 0x00000010 |
|
#define | ADL_DISPLAY_SLSGRID_SAMEMODESLS_SUPPORT 0x00000010 |
|
#define | ADL_DISPLAY_SLSMAP_BEZELMODE 0x00000010 |
| The bit mask identifies displays is currently in bezel mode. More...
|
|
#define | ADL_DISPLAY_SLSMAP_CURRENTCONFIG 0x00000004 |
| The bit mask identifies this map is currently in used for the current adapter. More...
|
|
#define | ADL_DISPLAY_SLSMAP_DISPLAYARRANGED 0x00000002 |
| The bit mask identifies displays from this map is arranged. More...
|
|
#define | ADL_DISPLAY_SLSMAP_IS_CLONEVT 0x4000 |
|
#define | ADL_DISPLAY_SLSMAP_IS_SLS 0x1000 |
|
#define | ADL_DISPLAY_SLSMAP_IS_SLSBUILDER 0x2000 |
|
#define | ADL_DISPLAY_SLSMAP_SLSLAYOUTMODE_EXPAND 0x0400 |
|
#define | ADL_DISPLAY_SLSMAP_SLSLAYOUTMODE_FILL 0x0200 |
|
#define | ADL_DISPLAY_SLSMAP_SLSLAYOUTMODE_FIT 0x0100 |
|
#define | ADL_DISPLAY_SLSMAPCONFIG_CREATE_OPTION_RELATIVETO_CURRENTANGLE 0x00000002 |
|
#define | ADL_DISPLAY_SLSMAPCONFIG_CREATE_OPTION_RELATIVETO_LANDSCAPE 0x00000001 |
|
#define | ADL_DISPLAY_SLSMAPCONFIG_GET_OPTION_RELATIVETO_CURRENTANGLE 0x00000002 |
|
#define | ADL_DISPLAY_SLSMAPCONFIG_GET_OPTION_RELATIVETO_LANDSCAPE 0x00000001 |
|
#define | ADL_DISPLAY_SLSMAPCONFIG_REARRANGE_OPTION_RELATIVETO_CURRENTANGLE 0x00000002 |
|
#define | ADL_DISPLAY_SLSMAPCONFIG_REARRANGE_OPTION_RELATIVETO_LANDSCAPE 0x00000001 |
|
#define | ADL_DISPLAY_SLSMAPINDEXLIST_OPTION_ACTIVE 0x00000001 |
| For onlay active SLS map info. More...
|
|
#define | ADL_DISPLAYDDCINFOEX_FLAG_DIGITALDEVICE (1 << 2) |
|
#define | ADL_DISPLAYDDCINFOEX_FLAG_DIGITALDEVICE (1 << 2) |
|
#define | ADL_DISPLAYDDCINFOEX_FLAG_EDIDEXTENSION (1 << 1) |
|
#define | ADL_DISPLAYDDCINFOEX_FLAG_EDIDEXTENSION (1 << 1) |
|
#define | ADL_DISPLAYDDCINFOEX_FLAG_HDMIAUDIODEVICE (1 << 3) |
|
#define | ADL_DISPLAYDDCINFOEX_FLAG_HDMIAUDIODEVICE (1 << 3) |
|
#define | ADL_DISPLAYDDCINFOEX_FLAG_PROJECTORDEVICE (1 << 0) |
|
#define | ADL_DISPLAYDDCINFOEX_FLAG_PROJECTORDEVICE (1 << 0) |
|
#define | ADL_DISPLAYDDCINFOEX_FLAG_SUPPORT_xvYCC601 (1 << 5) |
|
#define | ADL_DISPLAYDDCINFOEX_FLAG_SUPPORT_xvYCC601 (1 << 5) |
|
#define | ADL_DISPLAYDDCINFOEX_FLAG_SUPPORT_xvYCC709 (1 << 6) |
|
#define | ADL_DISPLAYDDCINFOEX_FLAG_SUPPORT_xvYCC709 (1 << 6) |
|
#define | ADL_DISPLAYDDCINFOEX_FLAG_SUPPORTS_AI (1 << 4) |
|
#define | ADL_DISPLAYDDCINFOEX_FLAG_SUPPORTS_AI (1 << 4) |
|
#define | ADL_DL_CLOCKINFO_FLAG_ALWAYSFULLSCREEN3D 0x00000002 |
|
#define | ADL_DL_CLOCKINFO_FLAG_FULLSCREEN3DONLY 0x00000001 |
|
#define | ADL_DL_CLOCKINFO_FLAG_THERMALPROTECTION 0x00000008 |
|
#define | ADL_DL_CLOCKINFO_FLAG_VPURECOVERYREDUCED 0x00000004 |
|
#define | ADL_DL_CONTROLLER_OVERLAY_ALPHA 0 |
|
#define | ADL_DL_CONTROLLER_OVERLAY_ALPHAPERPIX 1 |
|
#define | ADL_DL_DISPLAY_DATA_PACKET__INFO_PACKET_RESET 0x00000000 |
|
#define | ADL_DL_DISPLAY_DATA_PACKET__INFO_PACKET_SCAN 0x00000002 |
|
#define | ADL_DL_DISPLAY_DATA_PACKET__INFO_PACKET_SET 0x00000001 |
|
#define | ADL_DL_DISPLAY_DATA_PACKET__TYPE__AVI 0x00000001 |
|
#define | ADL_DL_DISPLAY_DATA_PACKET__TYPE__GAMMUT 0x00000002 |
|
#define | ADL_DL_DISPLAY_DATA_PACKET__TYPE__HDR 0x00000008 |
|
#define | ADL_DL_DISPLAY_DATA_PACKET__TYPE__SPD 0x00000010 |
|
#define | ADL_DL_DISPLAY_DATA_PACKET__TYPE__VENDORINFO 0x00000004 |
|
#define | ADL_DL_DISPLAY_DITHER_DISABLED 0 |
|
#define | ADL_DL_DISPLAY_DITHER_DITH10 7 |
| Spatial dithering to 10 bpc. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_DITH10_FM6 20 |
| Spatial dithering to 10 bpc followed by temporal dithering to 6 bpc. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_DITH10_FM8 19 |
| Spatial dithering to 10 bpc followed by temporal dithering to 8 bpc. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_DITH10_NO_FRAME_RAND 10 |
| Spatial dithering to 10 bpc. Random number generators are reset every frame, so the same input value of a certain pixel will always be dithered to the same output value. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_DITH6 5 |
| Spatial dithering to 6 bpc. Note that if the input is 12 bits, the two least significant bits will be truncated. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_DITH6_NO_FRAME_RAND 8 |
| Spatial dithering to 6 bpc. Random number generators are reset every frame, so the same input value of a certain pixel will always be dithered to the same output value. Note that if the input is 12 bits, the two least significant bits will be truncated. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_DITH8 6 |
| Spatial dithering to 8 bpc. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_DITH8_FM6 23 |
| Spatial dithering to 8 bpc followed by temporal dithering to 6 bpc. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_DITH8_NO_FRAME_RAND 9 |
| Spatial dithering to 8 bpc. Random number generators are reset every frame, so the same input value of a certain pixel will always be dithered to the same output value. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_DRIVER_DEFAULT 1 |
| Use default driver settings for dithering. Note that the default setting could be dithering disabled. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_FM10 4 |
| Temporal dithering to 10 bpc. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_FM6 2 |
| Temporal dithering to 6 bpc. Note that if the input is 12 bits, the two least significant bits will be truncated. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_FM8 3 |
| Temporal dithering to 8 bpc. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_LAST ADL_DL_DISPLAY_DITHER_DITH8_FM6 |
|
#define | ADL_DL_DISPLAY_DITHER_TRUN10 13 |
| Truncation to 10 bpc. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_TRUN10_DITH6 15 |
| Truncation to 10 bpc followed by spatial dithering to 6 bpc. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_TRUN10_DITH8 14 |
| Truncation to 10 bpc followed by spatial dithering to 8 bpc. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_TRUN10_DITH8_FM6 18 |
| Truncation to 10 bpc followed by spatial dithering to 8 bpc and temporal dithering to 6 bpc. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_TRUN10_FM6 17 |
| Truncation to 10 bpc followed by temporal dithering to 6 bpc. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_TRUN10_FM8 16 |
| Truncation to 10 bpc followed by temporal dithering to 8 bpc. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_TRUN6 11 |
| Truncation to 6 bpc. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_TRUN8 12 |
| Truncation to 8 bpc. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_TRUN8_DITH6 21 |
| Truncation to 8 bpc followed by spatial dithering to 6 bpc. More...
|
|
#define | ADL_DL_DISPLAY_DITHER_TRUN8_FM6 22 |
| Truncation to 8 bpc followed by temporal dithering to 6 bpc. More...
|
|
#define | ADL_DL_DISPLAYCONFIG_CONTYPE_CV_JPN 2 |
|
#define | ADL_DL_DISPLAYCONFIG_CONTYPE_CV_NA 3 |
|
#define | ADL_DL_DISPLAYCONFIG_CONTYPE_CV_NONI2C_JP 1 |
|
#define | ADL_DL_DISPLAYCONFIG_CONTYPE_CV_NONI2C_NA 4 |
|
#define | ADL_DL_DISPLAYCONFIG_CONTYPE_DISPLAYPORT 10 |
|
#define | ADL_DL_DISPLAYCONFIG_CONTYPE_DVI_D 6 |
|
#define | ADL_DL_DISPLAYCONFIG_CONTYPE_DVI_I 7 |
|
#define | ADL_DL_DISPLAYCONFIG_CONTYPE_HDMI_TYPE_A 8 |
|
#define | ADL_DL_DISPLAYCONFIG_CONTYPE_HDMI_TYPE_B 9 |
|
#define | ADL_DL_DISPLAYCONFIG_CONTYPE_UNKNOWN 0 |
|
#define | ADL_DL_DISPLAYCONFIG_CONTYPE_VGA 5 |
|
#define | ADL_DL_DISPLAYCONTENT_TYPE_CINEMA 4 |
|
#define | ADL_DL_DISPLAYCONTENT_TYPE_GAME 8 |
|
#define | ADL_DL_DISPLAYCONTENT_TYPE_GRAPHICS 1 |
|
#define | ADL_DL_DISPLAYCONTENT_TYPE_PHOTO 2 |
|
#define | ADL_DL_DISPLAYPROPERTY_EXPANSIONMODE_ASPECTRATIO 2 |
|
#define | ADL_DL_DISPLAYPROPERTY_EXPANSIONMODE_CENTER 0 |
|
#define | ADL_DL_DISPLAYPROPERTY_EXPANSIONMODE_FULLSCREEN 1 |
|
#define | ADL_DL_DISPLAYPROPERTY_TYPE_DOWNSCALE 11 |
|
#define | ADL_DL_DISPLAYPROPERTY_TYPE_EXPANSIONMODE 1 |
|
#define | ADL_DL_DISPLAYPROPERTY_TYPE_INTEGER_SCALING 12 |
|
#define | ADL_DL_DISPLAYPROPERTY_TYPE_ITCFLAGENABLE 9 |
| Enables ITC processing for HDMI panels that are capable of the feature. More...
|
|
#define | ADL_DL_DISPLAYPROPERTY_TYPE_UNKNOWN 0 |
| Values for ADLDisplayProperty.iPropertyType. More...
|
|
#define | ADL_DL_DISPLAYPROPERTY_TYPE_USEUNDERSCANSCALING 2 |
|
#define | ADL_DL_FANCTRL_FLAG_USER_DEFINED_SPEED 1 |
|
#define | ADL_DL_FANCTRL_SPEED_TYPE_PERCENT 1 |
|
#define | ADL_DL_FANCTRL_SPEED_TYPE_RPM 2 |
|
#define | ADL_DL_FANCTRL_SUPPORTS_PERCENT_READ 1 |
|
#define | ADL_DL_FANCTRL_SUPPORTS_PERCENT_WRITE 2 |
|
#define | ADL_DL_FANCTRL_SUPPORTS_RPM_READ 4 |
|
#define | ADL_DL_FANCTRL_SUPPORTS_RPM_WRITE 8 |
|
#define | ADL_DL_I2C_LINE_GPIO 0x00000008 |
|
#define | ADL_DL_I2C_LINE_OD_CONTROL 0x00000002 |
|
#define | ADL_DL_I2C_LINE_OEM 0x00000001 |
|
#define | ADL_DL_I2C_LINE_OEM2 0x00000003 |
|
#define | ADL_DL_I2C_LINE_OEM3 0x00000004 |
|
#define | ADL_DL_I2C_LINE_OEM4 0x00000005 |
|
#define | ADL_DL_I2C_LINE_OEM5 0x00000006 |
|
#define | ADL_DL_I2C_LINE_OEM6 0x00000007 |
|
#define | ADL_DL_I2C_MAXADDRESSLENGTH 0x00000006 |
|
#define | ADL_DL_I2C_MAXDATASIZE 0x00000018 |
|
#define | ADL_DL_I2C_MAXOFFSETLENGTH 0x00000004 |
|
#define | ADL_DL_I2C_MAXWRITEDATASIZE 0x0000000C |
|
#define | ADL_DL_I2C_SPEED_100K 100 |
|
#define | ADL_DL_I2C_SPEED_1M 1000 |
|
#define | ADL_DL_I2C_SPEED_2M 2300 |
|
#define | ADL_DL_I2C_SPEED_50K 50 |
|
#define | ADL_DL_MAX_MVPU_ADAPTERS 4 |
|
#define | ADL_DL_MAX_REGISTRY_PATH 256 |
|
#define | ADL_DL_MODETIMING_STANDARD_CUSTOM 0x00000008 |
|
#define | ADL_DL_MODETIMING_STANDARD_CVT 0x00000001 |
|
#define | ADL_DL_MODETIMING_STANDARD_CVT_RB 0x00000020 |
|
#define | ADL_DL_MODETIMING_STANDARD_DMT 0x00000004 |
|
#define | ADL_DL_MODETIMING_STANDARD_DRIVER_DEFAULT 0x00000010 |
|
#define | ADL_DL_MODETIMING_STANDARD_GTF 0x00000002 |
|
#define | ADL_DL_MVPU_STATUS_OFF 0 |
|
#define | ADL_DL_MVPU_STATUS_ON 1 |
|
#define | ADL_DL_POWERXPRESS_GPU_DISCRETE 2 |
|
#define | ADL_DL_POWERXPRESS_GPU_INTEGRATED 1 |
|
#define | ADL_DL_POWERXPRESS_SWITCH_RESULT_ALREADY 3 |
|
#define | ADL_DL_POWERXPRESS_SWITCH_RESULT_DECLINED 2 |
|
#define | ADL_DL_POWERXPRESS_SWITCH_RESULT_DEFERRED 5 |
|
#define | ADL_DL_POWERXPRESS_SWITCH_RESULT_STARTED 1 |
|
#define | ADL_DL_POWERXPRESS_VERSION (((ADL_DL_POWERXPRESS_VERSION_MAJOR) << 16) | ADL_DL_POWERXPRESS_VERSION_MINOR) |
|
#define | ADL_DL_POWERXPRESS_VERSION_MAJOR 2 |
|
#define | ADL_DL_POWERXPRESS_VERSION_MINOR 0 |
|
#define | ADL_DL_THERMAL_DOMAIN_GPU 1 |
|
#define | ADL_DL_THERMAL_DOMAIN_OTHER 0 |
|
#define | ADL_DL_THERMAL_FLAG_FANCONTROL 2 |
|
#define | ADL_DL_THERMAL_FLAG_INTERRUPT 1 |
|
#define | ADL_DL_TIMINGFLAG_DOUBLE_SCAN 0x0001 |
|
#define | ADL_DL_TIMINGFLAG_H_SYNC_POLARITY 0x0004 |
|
#define | ADL_DL_TIMINGFLAG_INTERLACED 0x0002 |
|
#define | ADL_DL_TIMINGFLAG_V_SYNC_POLARITY 0x0008 |
|
#define | ADL_DOT_ANALOG 3 |
| Define analog display output type. More...
|
|
#define | ADL_DOT_COMPOSITE 1 |
| Define composite display output type. More...
|
|
#define | ADL_DOT_DIGITAL 4 |
| Define digital display output type. More...
|
|
#define | ADL_DOT_SVIDEO 2 |
| Define SVideo display output type. More...
|
|
#define | ADL_DOT_UNKNOWN 0 |
|
#define | ADL_DT_COMPONENT_VIDEO 4 |
| Define Componment Video display type. More...
|
|
#define | ADL_DT_DIGITAL_FLAT_PANEL 3 |
| Define DFP display type. More...
|
|
#define | ADL_DT_LCD_PANEL 2 |
| Define LCD display type. More...
|
|
#define | ADL_DT_MONITOR 0 |
|
#define | ADL_DT_PROJECTOR 5 |
| Define Projector display type. More...
|
|
#define | ADL_DT_TELEVISION 1 |
| Define TV display type. More...
|
|
#define | ADL_EDID_PERSISTANCE_DISABLED 0 |
|
#define | ADL_EDID_PERSISTANCE_ENABLED 1 |
| Indicates persistence is enabled. More...
|
|
#define | ADL_EDID_REGAMMA_COEFFICIENTS (1 << 0) |
| describes whether the coefficients are from EDID or custom user values. More...
|
|
#define | ADL_EDID_REGAMMA_PREDEFINED_36 (1 << 6) |
| specifies that 3.6 gamma should be applied More...
|
|
#define | ADL_EDID_REGAMMA_PREDEFINED_APPCTRL (1 << 8) |
| specifies that regamma should be disabled, and application controls regamma content (of the whole screen) More...
|
|
#define | ADL_EDID_REGAMMA_PREDEFINED_BT709 (1 << 7) |
| specifies that BT709 gama should be applied More...
|
|
#define | ADL_EDID_REGAMMA_PREDEFINED_PQ (1 << 2) |
| specifies that PQ gamma curve should be applied More...
|
|
#define | ADL_EDID_REGAMMA_PREDEFINED_PQ_2084_INTERIM (1 << 3) |
| specifies that PQ gamma curve should be applied, lower max nits More...
|
|
#define | ADL_EDID_REGAMMA_PREDEFINED_SRGB (1 << 1) |
| specifies that standard SRGB gamma should be applied More...
|
|
#define | ADL_EMUL_MODE_ALWAYS 3 |
| Indicates if emulation is used always. More...
|
|
#define | ADL_EMUL_MODE_OFF 0 |
|
#define | ADL_EMUL_MODE_ON_CONNECTED 1 |
| Indicates if emulation is used when display connected. More...
|
|
#define | ADL_EMUL_MODE_ON_DISCONNECTED 2 |
| Indicates if emulation is used when display dis connected. More...
|
|
#define | ADL_EMUL_STATUS_EMULATED_DEVICE_PRESENT 0x2 |
| Indicates if emulated device is presented. More...
|
|
#define | ADL_EMUL_STATUS_EMULATED_DEVICE_USED 0x4 |
| Indicates if emulated device is used. More...
|
|
#define | ADL_EMUL_STATUS_LAST_ACTIVE_DEVICE_USED 0x8 |
| In case when last active real/emulated device used (when persistence is enabled but no emulation enforced then persistence will use last connected/emulated device). More...
|
|
#define | ADL_EMUL_STATUS_REAL_DEVICE_CONNECTED 0x1 |
|
#define | ADL_ERR -1 |
| Generic Error. Most likely one or more of the Escape calls to the driver failed! More...
|
|
#define | ADL_ERR_CALL_TO_INCOMPATIABLE_DRIVER -22 |
| escape call failed becuse of incompatiable driver found in driver store More...
|
|
#define | ADL_ERR_DISABLED_ADAPTER -10 |
| Call can't be made due to disabled adapter. More...
|
|
#define | ADL_ERR_FEATURESYNC_NOT_STARTED -24 |
| Feature Sync Start api is not called yet. More...
|
|
#define | ADL_ERR_INVALID_ADL_IDX -5 |
| Invalid ADL index passed. More...
|
|
#define | ADL_ERR_INVALID_CALLBACK -11 |
| Invalid Callback. More...
|
|
#define | ADL_ERR_INVALID_CONTROLLER_IDX -6 |
| Invalid controller index passed. More...
|
|
#define | ADL_ERR_INVALID_DIPLAY_IDX -7 |
| Invalid display index passed. More...
|
|
#define | ADL_ERR_INVALID_PARAM -3 |
| One of the parameter passed is invalid. More...
|
|
#define | ADL_ERR_INVALID_PARAM_SIZE -4 |
| One of the parameter size is invalid. More...
|
|
#define | ADL_ERR_INVALID_POWER_STATE -25 |
| Adapter is in an invalid power state. More...
|
|
#define | ADL_ERR_NO_ADMINISTRATOR_PRIVILEGES -23 |
| not running as administrator More...
|
|
#define | ADL_ERR_NO_XDISPLAY -21 |
| There's no Linux XDisplay in Linux Console environment. More...
|
|
#define | ADL_ERR_NOT_INIT -2 |
| ADL not initialized. More...
|
|
#define | ADL_ERR_NOT_SUPPORTED -8 |
| Function not supported by the driver. More...
|
|
#define | ADL_ERR_NULL_POINTER -9 |
| Null Pointer error. More...
|
|
#define | ADL_ERR_RESOURCE_CONFLICT -12 |
| Display Resource conflict. More...
|
|
#define | ADL_ERR_SET_INCOMPLETE -20 |
|
#define | ADL_FREESYNC_CAP_BORDERLESSWINDOWSUPPORTED (1 << 6) |
|
#define | ADL_FREESYNC_CAP_CURRENTMODESUPPORTED (1 << 3) |
|
#define | ADL_FREESYNC_CAP_DISPLAYSUPPORTED (1 << 2) |
|
#define | ADL_FREESYNC_CAP_GPUSUPPORTED (1 << 1) |
|
#define | ADL_FREESYNC_CAP_NOCFXORCFXSUPPORTED (1 << 4) |
|
#define | ADL_FREESYNC_CAP_NOGENLOCKORGENLOCKSUPPORTED (1 << 5) |
|
#define | ADL_FREESYNC_CAP_SUPPORTED (1 << 0) |
|
#define | ADL_FREESYNC_LABEL_ADAPTIVE_SYNC 2 |
|
#define | ADL_FREESYNC_LABEL_FREESYNC 1 |
|
#define | ADL_FREESYNC_LABEL_FREESYNC_PREMIUM 4 |
|
#define | ADL_FREESYNC_LABEL_FREESYNC_PREMIUM_PRO 5 |
|
#define | ADL_FREESYNC_LABEL_UNSUPPORTED 0 |
|
#define | ADL_FREESYNC_LABEL_VRR 3 |
|
#define | ADL_FREESYNC_USECASE_GAMING 0x4 |
| Indicates FreeSync is enabled for Gaming use case. More...
|
|
#define | ADL_FREESYNC_USECASE_STATIC 0x1 |
|
#define | ADL_FREESYNC_USECASE_VIDEO 0x2 |
| Indicates FreeSync is enabled for Video use case. More...
|
|
#define | ADL_GAMUT_GAMUT_VIDEO_CONTENT (1 << 1) |
|
#define | ADL_GAMUT_MATRIX_HD 2 |
|
#define | ADL_GAMUT_MATRIX_SD 1 |
|
#define | ADL_GAMUT_REFERENCE_SOURCE (1 << 0) |
| The flags desribes that gamut is related to source or to destination and to overlay or to graphics. More...
|
|
#define | ADL_GAMUT_REMAP_ONLY (1 << 2) |
|
#define | ADL_GAMUT_SPACE_ADOBE_RGB (1 << 2) |
|
#define | ADL_GAMUT_SPACE_APPCTRL (1 << 6) |
|
#define | ADL_GAMUT_SPACE_CCIR_2020 (1 << 5) |
|
#define | ADL_GAMUT_SPACE_CCIR_601 (1 << 1) |
|
#define | ADL_GAMUT_SPACE_CCIR_709 (1 << 0) |
|
#define | ADL_GAMUT_SPACE_CIE_RGB (1 << 3) |
|
#define | ADL_GAMUT_SPACE_CUSTOM (1 << 4) |
|
#define | ADL_GAMUT_WHITEPOINT_DIVIDER 10000 |
|
#define | ADL_GLSYNC_CONFIGMASK_FRAMELOCKCNTL (1 << 6) |
| The ADLGLSyncGenlockConfig.lFramelockCntlVector member is valid. More...
|
|
#define | ADL_GLSYNC_CONFIGMASK_NONE 0 |
| None of the ADLGLSyncGenlockConfig members are valid. More...
|
|
#define | ADL_GLSYNC_CONFIGMASK_SAMPLERATE (1 << 2) |
| The ADLGLSyncGenlockConfig.iSampleRate member is valid. More...
|
|
#define | ADL_GLSYNC_CONFIGMASK_SCANRATECOEFF (1 << 5) |
| The ADLGLSyncGenlockConfig.iScanRateCoeff member is valid. More...
|
|
#define | ADL_GLSYNC_CONFIGMASK_SIGNALSOURCE (1 << 0) |
| The ADLGLSyncGenlockConfig.lSignalSource member is valid. More...
|
|
#define | ADL_GLSYNC_CONFIGMASK_SYNCDELAY (1 << 3) |
| The ADLGLSyncGenlockConfig.lSyncDelay member is valid. More...
|
|
#define | ADL_GLSYNC_CONFIGMASK_SYNCFIELD (1 << 1) |
| The ADLGLSyncGenlockConfig.iSyncField member is valid. More...
|
|
#define | ADL_GLSYNC_CONFIGMASK_TRIGGEREDGE (1 << 4) |
| The ADLGLSyncGenlockConfig.iTriggerEdge member is valid. More...
|
|
#define | ADL_GLSYNC_COUNTER_SWAP ( 1 << 0 ) |
|
#define | ADL_GLSYNC_FRAMELOCKCNTL_DISABLE ( 1 << 1) |
|
#define | ADL_GLSYNC_FRAMELOCKCNTL_ENABLE ( 1 << 0) |
| Framelock is enabled. More...
|
|
#define | ADL_GLSYNC_FRAMELOCKCNTL_NONE 0 |
| Framelock is disabled. More...
|
|
#define | ADL_GLSYNC_FRAMELOCKCNTL_STATE_ENABLE ( 1 << 0) |
|
#define | ADL_GLSYNC_FRAMELOCKCNTL_STATE_KMD (1 << 4) |
|
#define | ADL_GLSYNC_FRAMELOCKCNTL_SWAP_COUNTER_ACK ( 1 << 3) |
|
#define | ADL_GLSYNC_FRAMELOCKCNTL_SWAP_COUNTER_RESET ( 1 << 2) |
|
#define | ADL_GLSYNC_FRAMELOCKCNTL_VERSION_KMD (1 << 4) |
|
#define | ADL_GLSYNC_LEDCOLOR_FLASH_GREEN 5 |
| GL-Sync LED is flashing green. More...
|
|
#define | ADL_GLSYNC_LEDCOLOR_GREEN 4 |
| GL-Sync LED is green. More...
|
|
#define | ADL_GLSYNC_LEDCOLOR_NOLIGHT 1 |
| GL-Sync LED is unlit. More...
|
|
#define | ADL_GLSYNC_LEDCOLOR_RED 3 |
| GL-Sync LED is red. More...
|
|
#define | ADL_GLSYNC_LEDCOLOR_UNDEFINED 0 |
| GL-Sync LED undefined color. More...
|
|
#define | ADL_GLSYNC_LEDCOLOR_YELLOW 2 |
| GL-Sync LED is yellow. More...
|
|
#define | ADL_GLSYNC_LEDTYPE_BNC 0 |
| Index into the ADL_Workstation_GLSyncPortState_Get returned ppGlSyncLEDs array for the one LED of the BNC port. More...
|
|
#define | ADL_GLSYNC_LEDTYPE_RJ45_LEFT 0 |
| Index into the ADL_Workstation_GLSyncPortState_Get returned ppGlSyncLEDs array for the Left LED of the RJ45(1) or RJ45(2) port. More...
|
|
#define | ADL_GLSYNC_LEDTYPE_RJ45_RIGHT 1 |
| Index into the ADL_Workstation_GLSyncPortState_Get returned ppGlSyncLEDs array for the Right LED of the RJ45(1) or RJ45(2) port. More...
|
|
#define | ADL_GLSYNC_MODECNTL_GENLOCK 0x00000001 |
| Bitfield used to configure the display as genlocked (either as Timing Client or as Timing Server) More...
|
|
#define | ADL_GLSYNC_MODECNTL_NONE 0x00000000 |
| Used to configure the display to use internal timing (not genlocked) More...
|
|
#define | ADL_GLSYNC_MODECNTL_STATUS_GENLOCK 0x00000001 |
| Display is currently genlocked. More...
|
|
#define | ADL_GLSYNC_MODECNTL_STATUS_GENLOCK_ALLOWED 0x00000004 |
| Display is capable of being genlocked. More...
|
|
#define | ADL_GLSYNC_MODECNTL_STATUS_NONE 0x00000000 |
| Display is currently not genlocked. More...
|
|
#define | ADL_GLSYNC_MODECNTL_STATUS_SETMODE_REQUIRED 0x00000002 |
| Display requires a mode switch. More...
|
|
#define | ADL_GLSYNC_MODECNTL_TIMINGSERVER 0x00000002 |
| Bitfield used to configure the display as Timing Server. More...
|
|
#define | ADL_GLSYNC_PORT_BNC 1 |
| BNC port of of GL-Sync module. More...
|
|
#define | ADL_GLSYNC_PORT_RJ45PORT1 2 |
| RJ45(1) port of of GL-Sync module. More...
|
|
#define | ADL_GLSYNC_PORT_RJ45PORT2 3 |
| RJ45(2) port of of GL-Sync module. More...
|
|
#define | ADL_GLSYNC_PORT_UNKNOWN 0 |
|
#define | ADL_GLSYNC_PORTCNTL_NONE 0x00000000 |
| Used to configure the RJ54(1) or RJ42(2) port of GL-Sync is as Idle. More...
|
|
#define | ADL_GLSYNC_PORTCNTL_OUTPUT 0x00000001 |
| Used to configure the RJ54(1) or RJ42(2) port of GL-Sync is as Output. More...
|
|
#define | ADL_GLSYNC_PORTSTATE_IDLE 2 |
| GL-Sync port is Idle. More...
|
|
#define | ADL_GLSYNC_PORTSTATE_INPUT 3 |
| GL-Sync port has an Input signal. More...
|
|
#define | ADL_GLSYNC_PORTSTATE_NOCABLE 1 |
| GL-Sync port is not connected. More...
|
|
#define | ADL_GLSYNC_PORTSTATE_OUTPUT 4 |
| GL-Sync port is Output. More...
|
|
#define | ADL_GLSYNC_PORTSTATE_UNDEFINED 0 |
| GL-Sync port state is undefined. More...
|
|
#define | ADL_GLSYNC_SCANRATECOEFF_UNDEFINED 0 |
| GL-Sync scan rate coefficient/multiplier is undefined. More...
|
|
#define | ADL_GLSYNC_SCANRATECOEFF_x1 8 |
| GL-Sync scan rate coefficient/multiplier is 1 (default) More...
|
|
#define | ADL_GLSYNC_SCANRATECOEFF_x1_DIV_2 11 |
| GL-Sync scan rate coefficient/multiplier is 1 : 2. More...
|
|
#define | ADL_GLSYNC_SCANRATECOEFF_x1_DIV_3 13 |
| GL-Sync scan rate coefficient/multiplier is 1 : 3. More...
|
|
#define | ADL_GLSYNC_SCANRATECOEFF_x1_DIV_4 14 |
| GL-Sync scan rate coefficient/multiplier is 1 : 4. More...
|
|
#define | ADL_GLSYNC_SCANRATECOEFF_x1_DIV_5 15 |
| GL-Sync scan rate coefficient/multiplier is 1 : 5. More...
|
|
#define | ADL_GLSYNC_SCANRATECOEFF_x2 5 |
| GL-Sync scan rate coefficient/multiplier is 2. More...
|
|
#define | ADL_GLSYNC_SCANRATECOEFF_x2_DIV_3 10 |
| GL-Sync scan rate coefficient/multiplier is 2 : 3. More...
|
|
#define | ADL_GLSYNC_SCANRATECOEFF_x2_DIV_5 12 |
| GL-Sync scan rate coefficient/multiplier is 2 : 5 (SMPTE) More...
|
|
#define | ADL_GLSYNC_SCANRATECOEFF_x3 3 |
| GL-Sync scan rate coefficient/multiplier is 3. More...
|
|
#define | ADL_GLSYNC_SCANRATECOEFF_x3_DIV_2 6 |
| GL-Sync scan rate coefficient/multiplier is 3 : 2. More...
|
|
#define | ADL_GLSYNC_SCANRATECOEFF_x4 2 |
| GL-Sync scan rate coefficient/multiplier is 4. More...
|
|
#define | ADL_GLSYNC_SCANRATECOEFF_x4_DIV_5 9 |
| GL-Sync scan rate coefficient/multiplier is 4 : 5. More...
|
|
#define | ADL_GLSYNC_SCANRATECOEFF_x5 1 |
| GL-Sync scan rate coefficient/multiplier is 5. More...
|
|
#define | ADL_GLSYNC_SCANRATECOEFF_x5_DIV_2 4 |
| GL-Sync scan rate coefficient/multiplier is 5:2 (SMPTE) More...
|
|
#define | ADL_GLSYNC_SCANRATECOEFF_x5_DIV_4 7 |
| GL-Sync scan rate coefficient/multiplier is 5 : 4. More...
|
|
#define | ADL_GLSYNC_SIGNALSOURCE_BNCPORT 0x00000102 |
| GL-Sync signal source is the BNC GL-Sync port. More...
|
|
#define | ADL_GLSYNC_SIGNALSOURCE_FREERUN 0x00000101 |
| GL-Sync signal source is Free Run. More...
|
|
#define | ADL_GLSYNC_SIGNALSOURCE_RJ45PORT1 0x00000103 |
| GL-Sync signal source is the RJ45(1) GL-Sync port. More...
|
|
#define | ADL_GLSYNC_SIGNALSOURCE_RJ45PORT2 0x00000104 |
| GL-Sync signal source is the RJ45(2) GL-Sync port. More...
|
|
#define | ADL_GLSYNC_SIGNALSOURCE_UNDEFINED 0x00000100 |
| GL-Sync signal source is undefined. More...
|
|
#define | ADL_GLSYNC_SIGNALTYPE_1080I 7 |
| GL-Sync signal type is 1080I. More...
|
|
#define | ADL_GLSYNC_SIGNALTYPE_1080P 6 |
| GL-Sync signal type is 1080P. More...
|
|
#define | ADL_GLSYNC_SIGNALTYPE_480I 1 |
| GL-Sync signal type is 480I. More...
|
|
#define | ADL_GLSYNC_SIGNALTYPE_480P 3 |
| GL-Sync signal type is 480P. More...
|
|
#define | ADL_GLSYNC_SIGNALTYPE_576I 2 |
| GL-Sync signal type is 576I. More...
|
|
#define | ADL_GLSYNC_SIGNALTYPE_576P 4 |
| GL-Sync signal type is 576P. More...
|
|
#define | ADL_GLSYNC_SIGNALTYPE_720P 5 |
| GL-Sync signal type is 720P. More...
|
|
#define | ADL_GLSYNC_SIGNALTYPE_ANALOG 10 |
| GL_Sync signal type is Analog. More...
|
|
#define | ADL_GLSYNC_SIGNALTYPE_SDI 8 |
| GL-Sync signal type is SDI. More...
|
|
#define | ADL_GLSYNC_SIGNALTYPE_TTL 9 |
| GL-Sync signal type is TTL. More...
|
|
#define | ADL_GLSYNC_SIGNALTYPE_UNDEFINED 0 |
| GL-Sync signal type is unknown. More...
|
|
#define | ADL_GLSYNC_SYNCFIELD_1 2 |
| GL-Sync sync field option is Sync to Both fields (used for Interlaced signal types) More...
|
|
#define | ADL_GLSYNC_SYNCFIELD_BOTH 1 |
| GL-Sync sync field option is Sync to Field 1 (used for Interlaced signal types) More...
|
|
#define | ADL_GLSYNC_SYNCFIELD_UNDEFINED 0 |
| GL-Sync sync field option is undefined. More...
|
|
#define | ADL_GLSYNC_TRIGGEREDGE_BOTH 3 |
| GL-Sync trigger edge is both the rising and the falling edge. More...
|
|
#define | ADL_GLSYNC_TRIGGEREDGE_FALLING 2 |
| GL-Sync trigger edge is the falling edge. More...
|
|
#define | ADL_GLSYNC_TRIGGEREDGE_RISING 1 |
| GL-Sync trigger edge is the rising edge. More...
|
|
#define | ADL_GLSYNC_TRIGGEREDGE_UNDEFINED 0 |
| GL-Sync trigger edge is undefined. More...
|
|
#define | ADL_HDR_CEA861_3 0x0001 |
| HDR10/CEA861.3 HDR supported. More...
|
|
#define | ADL_HDR_DOLBYVISION 0x0002 |
|
#define | ADL_HDR_FREESYNC_BACKLIGHT_SUPPORT 0x0001 |
| Global backlight control supported. More...
|
|
#define | ADL_HDR_FREESYNC_HDR 0x0004 |
| FreeSync HDR supported. More...
|
|
#define | ADL_HDR_FREESYNC_LOCAL_DIMMING 0x0002 |
| Local dimming supported. More...
|
|
#define | ADL_I2C_MAJOR_API_REV 0x00000001 |
|
#define | ADL_I2C_MINOR_DEFAULT_API_REV 0x00000000 |
|
#define | ADL_I2C_MINOR_OEM_API_REV 0x00000001 |
|
#define | ADL_LANECOUNT_DEF ADL_LANECOUNT_FOUR |
| Indicates default value of lane count. More...
|
|
#define | ADL_LANECOUNT_EIGHT 8 |
| Indicates if lane count is 8. More...
|
|
#define | ADL_LANECOUNT_FOUR 4 |
| Indicates if lane count is 4. More...
|
|
#define | ADL_LANECOUNT_ONE 1 |
| Indicates if lane count is 1. More...
|
|
#define | ADL_LANECOUNT_TWO 2 |
| Indicates if lane count is 2. More...
|
|
#define | ADL_LANECOUNT_UNKNOWN 0 |
|
#define | ADL_LINK_BITRATE_1_62_GHZ 0x06 |
| Indicates if link rate is 1.62Ghz. More...
|
|
#define | ADL_LINK_BITRATE_2_7_GHZ 0x0A |
| Indicates if link rate is 2.7Ghz. More...
|
|
#define | ADL_LINK_BITRATE_5_4_GHZ 0x14 |
| Indicates if link rate is 5.4Ghz. More...
|
|
#define | ADL_LINK_BITRATE_8_1_GHZ 0x1E |
| Indicates if link rate is 8.1Ghz. More...
|
|
#define | ADL_LINK_BITRATE_DEF ADL_LINK_BITRATE_2_7_GHZ |
| Indicates default value of link rate. More...
|
|
#define | ADL_LINK_BITRATE_UNKNOWN 0 |
|
#define | ADL_MAX_AUDIO_SAMPLE_RATE_COUNT 16 |
|
#define | ADL_MAX_CONNECTION_TYPES 32 |
| Indicates the Maximum supported properties of connection. More...
|
|
#define | ADL_MAX_DISPLAY_EDID_DATA_SIZE 1024 |
| Indicates the Maximum size of EDID data block size. More...
|
|
#define | ADL_MAX_DISPLAY_NAME 256 |
| needed for ADLDDCInfo structure More...
|
|
#define | ADL_MAX_EDID_EXTENSION_BLOCKS 3 |
|
#define | ADL_MAX_EDIDDATA_SIZE 256 |
| Display Get Cached EDID flag. More...
|
|
#define | ADL_MAX_ERROR_RECORDS_COUNT 256 |
| Indicates the Maximum count of Error Records. More...
|
|
#define | ADL_MAX_GLSYNC_PORT_LEDS 8 |
|
#define | ADL_MAX_GLSYNC_PORTS 8 |
|
#define | ADL_MAX_OVERRIDEEDID_SIZE 512 |
|
#define | ADL_MAX_POWER_POLICY 6 |
| Indicates the maximum number of power states supported. More...
|
|
#define | ADL_MAX_RAD_LINK_COUNT 15 |
| Maximum Relative Address Link. More...
|
|
#define | ADL_MAX_RELATIVE_ADDRESS_LINK_COUNT 15 |
| Indicates the Maximum relative address link count. More...
|
|
#define | ADL_MEMORYREQTYPE_GPURESERVEDVISIBLE (1 << 2) |
| Indicates that this is amount of visible memory per GPU that should be reserved for all other allocations. More...
|
|
#define | ADL_MEMORYREQTYPE_INVISIBLE (1 << 1) |
| Indicates that this is the invisible memory. More...
|
|
#define | ADL_MEMORYREQTYPE_VISIBLE (1 << 0) |
|
#define | ADL_MST_COMMANDLINE_BROADCAST 0x2 |
| Indicates the MST command line to send message in broadcast way it the bit is set. More...
|
|
#define | ADL_MST_COMMANDLINE_PATH_MSG 0x1 |
|
#define | ADL_OD6_CAPABILITY_FANSPEED_IN_RPM 0x00000080 |
| Indicate that Fan speed needs to be displayed in RPM. More...
|
|
#define | ADL_OD6_CAPABILITY_GPU_ACTIVITY_MONITOR 0x00000004 |
| Indicate that graphics activity reporting is supported. More...
|
|
#define | ADL_OD6_CAPABILITY_MCLK_CUSTOMIZATION 0x00000002 |
| Indicate that memory clock can be changed. More...
|
|
#define | ADL_OD6_CAPABILITY_PERCENT_ADJUSTMENT 0x00000020 |
| Indicate that OD6+ percentage adjustment is supported. More...
|
|
#define | ADL_OD6_CAPABILITY_POWER_CONTROL 0x00000008 |
| Indicate that power limit can be customized. More...
|
|
#define | ADL_OD6_CAPABILITY_SCLK_CUSTOMIZATION 0x00000001 |
|
#define | ADL_OD6_CAPABILITY_THERMAL_LIMIT_UNLOCK 0x00000040 |
| Indicate that Thermal Limit Unlock is supported. More...
|
|
#define | ADL_OD6_CAPABILITY_VOLTAGE_CONTROL 0x00000010 |
| Indicate that SVI2 Voltage Control is supported. More...
|
|
#define | ADL_OD6_FANSPEED_TYPE_PERCENT 0x00000001 |
|
#define | ADL_OD6_FANSPEED_TYPE_RPM 0x00000002 |
| Fan speed reported in RPM. More...
|
|
#define | ADL_OD6_FANSPEED_USER_DEFINED 0x00000100 |
| Fan speed has been customized by the user, and fan is not running in automatic mode. More...
|
|
#define | ADL_OD6_GETSTATEINFO_CURRENT 0x00000003 |
|
#define | ADL_OD6_GETSTATEINFO_CUSTOM_PERFORMANCE 0x00000004 |
|
#define | ADL_OD6_GETSTATEINFO_CUSTOM_POWER_SAVING 0x00000005 |
| Do not use. Reserved for future use. More...
|
|
#define | ADL_OD6_GETSTATEINFO_DEFAULT_PERFORMANCE 0x00000001 |
|
#define | ADL_OD6_GETSTATEINFO_DEFAULT_POWER_SAVING 0x00000002 |
| Do not use. Reserved for future use. More...
|
|
#define | ADL_OD6_SETSTATE_PERFORMANCE 0x00000001 |
|
#define | ADL_OD6_SETSTATE_POWER_SAVING 0x00000002 |
| Do not use. Reserved for future use. More...
|
|
#define | ADL_OD6_STATE_PERFORMANCE 0x00000001 |
|
#define | ADL_OD6_SUPPORTEDSTATE_PERFORMANCE 0x00000001 |
|
#define | ADL_OD6_SUPPORTEDSTATE_POWER_SAVING 0x00000002 |
| Do not use. Reserved for future use. More...
|
|
#define | ADL_OD6_TCCAPS_FANSPEED_CONTROL 0x00000002 |
| GPU fan speed control is supported. More...
|
|
#define | ADL_OD6_TCCAPS_FANSPEED_PERCENT_READ 0x00000100 |
| Fan speed percentage can be read. More...
|
|
#define | ADL_OD6_TCCAPS_FANSPEED_PERCENT_WRITE 0x00000200 |
| Fan speed can be set by specifying a percentage value. More...
|
|
#define | ADL_OD6_TCCAPS_FANSPEED_RPM_READ 0x00000400 |
| Fan speed RPM (revolutions-per-minute) can be read. More...
|
|
#define | ADL_OD6_TCCAPS_FANSPEED_RPM_WRITE 0x00000800 |
| Fan speed can be set by specifying an RPM value. More...
|
|
#define | ADL_OD6_TCCAPS_THERMAL_CONTROLLER 0x00000001 |
|
#define | ADL_ODN_EVENTCOUNTER_THERMAL 0 |
|
#define | ADL_ODN_EVENTCOUNTER_VPURECOVERY 1 |
|
#define | ADL_OK 0 |
| ADL function completed successfully. More...
|
|
#define | ADL_OK_MODE_CHANGE 2 |
| All OK but need mode change. More...
|
|
#define | ADL_OK_RESTART 3 |
| All OK, but need restart. More...
|
|
#define | ADL_OK_WAIT 4 |
|
#define | ADL_OK_WARNING 1 |
| All OK, but with warning. More...
|
|
#define | ADL_OSMODEFLAG_DEFAULT 0 |
|
#define | ADL_OSMODEINFOCOLOURDEPTH_DEFAULT 8 |
|
#define | ADL_OSMODEINFOCOLOURDEPTH_DEFAULT16 16 |
|
#define | ADL_OSMODEINFOCOLOURDEPTH_DEFAULT24 24 |
|
#define | ADL_OSMODEINFOCOLOURDEPTH_DEFAULT32 32 |
|
#define | ADL_OSMODEINFOORIENTATION_DEFAULT 0 |
|
#define | ADL_OSMODEINFOORIENTATION_DEFAULT_WIN7 DISPLAYCONFIG_ROTATION_FORCE_UINT32 |
|
#define | ADL_OSMODEINFOREFRESHRATE_DEFAULT 60 |
|
#define | ADL_OSMODEINFOXPOS_DEFAULT -640 |
|
#define | ADL_OSMODEINFOXRES_DEFAULT 640 |
|
#define | ADL_OSMODEINFOXRES_DEFAULT800 800 |
|
#define | ADL_OSMODEINFOYPOS_DEFAULT 0 |
|
#define | ADL_OSMODEINFOYRES_DEFAULT 480 |
|
#define | ADL_OSMODEINFOYRES_DEFAULT600 600 |
|
#define | ADL_PM_PARAM_DONT_CHANGE 0 |
| Defines used by OD5. More...
|
|
#define | ADL_PMLOG_MAX_SENSORS 256 |
|
#define | ADL_PX_CONFIGCAPS_CF_SUPPORT 0x0002 |
|
#define | ADL_PX_CONFIGCAPS_DYNAMIC_SUPPORT 0x0040 |
|
#define | ADL_PX_CONFIGCAPS_FIXED_SUPPORT 0x0020 |
|
#define | ADL_PX_CONFIGCAPS_HIDE_AUTO_SWITCH 0x0080 |
|
#define | ADL_PX_CONFIGCAPS_MUXLESS 0x0004 |
|
#define | ADL_PX_CONFIGCAPS_NON_AMD_DRIVEN_DISPLAYS 0x0010 |
|
#define | ADL_PX_CONFIGCAPS_PROFILE_COMPLIANT 0x0008 |
|
#define | ADL_PX_CONFIGCAPS_SPLASHSCREEN_SUPPORT 0x0001 |
| The bit mask identifies PX caps for ADLPXConfigCaps.iPXConfigCapMask and ADLPXConfigCaps.iPXConfigCapValue. More...
|
|
#define | ADL_PX_SCHEMEMASK_DYNAMIC 0x0002 |
|
#define | ADL_PX_SCHEMEMASK_FIXED 0x0001 |
| The bit mask identifies PX schemes for ADLPXSchemeRange. More...
|
|
#define | ADL_QUERY_CURRENT_DATA 2 |
| Indicates Data currently in use. More...
|
|
#define | ADL_QUERY_EMULATED_DATA 1 |
| Indicates Emulated data. More...
|
|
#define | ADL_QUERY_REAL_DATA 0 |
|
#define | ADL_RADEON_LED_MAX_BRIGHTNESS 2 |
| Maximum brightness supported by Radeon LED interface. More...
|
|
#define | ADL_RADEON_LED_MAX_LED_COLUMN_ON_GRID 24 |
| Maximum LED COLUMN ON GRID. More...
|
|
#define | ADL_RADEON_LED_MAX_LED_ROW_ON_GRID 7 |
| Maximum LED ROW ON GRID. More...
|
|
#define | ADL_RADEON_LED_MAX_MORSE_CODE 260 |
| Maximum MORSE code supported string. More...
|
|
#define | ADL_RADEON_LED_MAX_RGB 255 |
| Maximum RGB supported by Radeon LED interface. More...
|
|
#define | ADL_RADEON_LED_MAX_SPEED 4 |
| Maximum speed supported by Radeon LED interface. More...
|
|
#define | ADL_REG_DEVICE_FUNCTION_1 0x00000001 |
|
#define | ADL_REGAMMA_COEFFICIENT_A0_DIVIDER 10000000 |
| gamma a0 coefficient uses the following divider: More...
|
|
#define | ADL_REGAMMA_COEFFICIENT_A1A2A3_DIVIDER 1000 |
| gamma a1 ,a2,a3 coefficients use the following divider: More...
|
|
#define | ADL_SCA_LOCAL_DIMMING_DISABLE 0x0001 |
| Disable local dimming. More...
|
|
#define | ADL_SLS_DESKTOPROTATIONSLS_SUPPORT 0x0008 |
|
#define | ADL_SLS_DISPLAYROTATIONSLS_SUPPORT 0x0004 |
|
#define | ADL_SLS_LAYOUTMODE_INVALID 0x0010 |
|
#define | ADL_SLS_MIXMODESLS_SUPPORT 0x0002 |
|
#define | ADL_SLS_MODES_INVALID 0x0002 |
|
#define | ADL_SLS_POSITIONS_INVALID 0x0008 |
|
#define | ADL_SLS_ROTATIONS_INVALID 0x0004 |
|
#define | ADL_SLS_SAMEMODESLS_SUPPORT 0x0001 |
|
#define | ADL_SLS_TARGETS_INVALID 0x0001 |
|
#define | ADL_STANDARD_NTSC_JPN (1 << 1) |
|
#define | ADL_STANDARD_NTSC_M (1 << 0) |
| TV Standards Definitions. More...
|
|
#define | ADL_STANDARD_NTSC_N (1 << 2) |
|
#define | ADL_STANDARD_PAL_B (1 << 3) |
|
#define | ADL_STANDARD_PAL_COMB_N (1 << 4) |
|
#define | ADL_STANDARD_PAL_D (1 << 5) |
|
#define | ADL_STANDARD_PAL_G (1 << 6) |
|
#define | ADL_STANDARD_PAL_H (1 << 7) |
|
#define | ADL_STANDARD_PAL_I (1 << 8) |
|
#define | ADL_STANDARD_PAL_K (1 << 9) |
|
#define | ADL_STANDARD_PAL_K1 (1 << 10) |
|
#define | ADL_STANDARD_PAL_L (1 << 11) |
|
#define | ADL_STANDARD_PAL_M (1 << 12) |
|
#define | ADL_STANDARD_PAL_N (1 << 13) |
|
#define | ADL_STANDARD_PAL_SECAM_D (1 << 14) |
|
#define | ADL_STANDARD_PAL_SECAM_K (1 << 15) |
|
#define | ADL_STANDARD_PAL_SECAM_K1 (1 << 16) |
|
#define | ADL_STANDARD_PAL_SECAM_L (1 << 17) |
|
#define | ADL_STEREO_ACTIVE (1 << 1) |
| This value indicates that the workstation card supports active stereo. This is also used to set the stereo mode to active though the stereo output connector. More...
|
|
#define | ADL_STEREO_AUTO_HORIZONTAL (1 << 30) |
| This value indicates that the workstation card supports auto-stereo monitors with horizontal interleave. This is also used to set the stereo mode to use the auto-stereo monitor with horizontal interleave. More...
|
|
#define | ADL_STEREO_AUTO_SAMSUNG (1 << 11) |
| This value indicates that the workstation card supports auto-stereo monitors with Samsung. More...
|
|
#define | ADL_STEREO_AUTO_TSL (1 << 12) |
| This value indicates that the workstation card supports auto-stereo monitors with Tridility. More...
|
|
#define | ADL_STEREO_AUTO_VERTICAL (1 << 31) |
| This value indicates that the workstation card supports auto-stereo monitors with vertical interleave. This is also used to set the stereo mode to use the auto-stereo monitor with vertical interleave. More...
|
|
#define | ADL_STEREO_BLUE_LINE (1 << 3) |
| This value indicates that the workstation card supports active stereo via "blue-line". More...
|
|
#define | ADL_STEREO_OFF 0 |
| This value is used to turn off stereo mode. More...
|
|
#define | ADL_STEREO_PASSIVE (1 << 6) |
| This value indicates that the workstation card supports passive stereo, ie. non stereo sync. More...
|
|
#define | ADL_STEREO_PASSIVE_HORIZ (1 << 7) |
| This value indicates that the workstation card supports auto-stereo monitors with vertical interleave. This is also used to set the stereo mode to use the auto-stereo monitor with vertical interleave. More...
|
|
#define | ADL_STEREO_PASSIVE_VERT (1 << 8) |
| This value indicates that the workstation card supports auto-stereo monitors with vertical interleave. This is also used to set the stereo mode to use the auto-stereo monitor with vertical interleave. More...
|
|
#define | ADL_STEREO_SUPPORTED (1 << 2) |
| This value indicates that the workstation card supports active stereo though stereo output connector. More...
|
|
#define | ADL_TF_BT709 0x0002 |
| BT.709. More...
|
|
#define | ADL_TF_DOLBYVISION 0x0040 |
| DolbyVision. More...
|
|
#define | ADL_TF_GAMMA_22 0x0080 |
| Plain 2.2 gamma curve. More...
|
|
#define | ADL_TF_LINEAR_0_1 0x0010 |
| Linear 0 - 1. More...
|
|
#define | ADL_TF_LINEAR_0_125 0x0020 |
| Linear 0 - 125. More...
|
|
#define | ADL_TF_PQ2084 0x0004 |
| PQ2084. More...
|
|
#define | ADL_TF_PQ2084_INTERIM 0x0008 |
| PQ2084-Interim. More...
|
|
#define | ADL_TF_sRGB 0x0001 |
| sRGB More...
|
|
#define | ADL_TV_SCART (1 << 1) |
|
#define | ADL_TV_STANDARDS (1 << 0) |
|
#define | ADL_USE_GAMMA_RAMP (1 << 4) |
| Used for struct ADLRegamma. Feature if set use gamma ramp, if missing use regamma coefficents. More...
|
|
#define | ADL_WHITE_POINT_5000K (1 << 0) |
| Predefine white point values are structed similar to gamut . More...
|
|
#define | ADL_WHITE_POINT_6500K (1 << 1) |
|
#define | ADL_WHITE_POINT_7500K (1 << 2) |
|
#define | ADL_WHITE_POINT_9300K (1 << 3) |
|
#define | ADL_WHITE_POINT_CUSTOM (1 << 4) |
|
#define | ADL_WORKSTATION_LOADBALANCING_AVAILABLE 0x00000002 |
| Load balancing is available. More...
|
|
#define | ADL_WORKSTATION_LOADBALANCING_DISABLED 0x00000000 |
| Load balancing is disabled. More...
|
|
#define | ADL_WORKSTATION_LOADBALANCING_ENABLED 0x00000001 |
| Load balancing is Enabled. More...
|
|
#define | ADL_WORKSTATION_LOADBALANCING_SUPPORTED 0x00000001 |
| Load balancing is supported. More...
|
|
#define | ADL_XFIREX_STATE_3DACTIVE ( 1 << 4 ) /* 3D client is active - CrossfireX cannot be safely enabled */ |
|
#define | ADL_XFIREX_STATE_CF_RECONFIG_REQUIRED ( 1 << 30 ) /* CrossfireX need to be reconfigured by CCC because of a LDA chain broken */ |
|
#define | ADL_XFIREX_STATE_DISABLE_CF_REBOOT_REQUIRED ( 1 << 28 ) /* System needs a reboot after disable CrossfireX */ |
|
#define | ADL_XFIREX_STATE_DOWNGRADEMEM ( 1 << 2 ) /* CrossfireX cannot be enabled unless mem downgraded */ |
|
#define | ADL_XFIREX_STATE_DOWNGRADEMEMBANKS ( 1 << 22 ) /* CrossfireX cannot be enabled unless memory banks downgraded */ |
|
#define | ADL_XFIREX_STATE_DOWNGRADEPIPES ( 1 << 1 ) /* CrossfireX can be enabled if pipes are downgraded */ |
|
#define | ADL_XFIREX_STATE_DOWNGRADEVISMEM ( 1 << 8 ) /* CrossfireX cannot be enabled unless visible mem downgraded */ |
|
#define | ADL_XFIREX_STATE_DRV_HANDLE_DOWNGRADE_KEY ( 1 << 29 ) /* Indicate base driver handles the downgrade key updating */ |
|
#define | ADL_XFIREX_STATE_DUALDISPLAYSALLOWED ( 1 << 24 ) /* Extended desktop or clone mode is allowed. */ |
|
#define | ADL_XFIREX_STATE_ENABLE_CF_REBOOT_REQUIRED ( 1 << 27 ) /* System needs a reboot bofore enable CrossfireX */ |
|
#define | ADL_XFIREX_STATE_ERRORGETTINGSTATUS ( 1 << 31 ) /* Could not obtain current status */ |
|
#define | ADL_XFIREX_STATE_INVALIDINTERCONNECTION ( 1 << 20 ) /* Cannot support current inter-connection configuration */ |
|
#define | ADL_XFIREX_STATE_LESSTHAN8LANE_MASTER ( 1 << 9 ) /* CrossfireX can be enabled however performance not optimal due to <8 lanes */ |
|
#define | ADL_XFIREX_STATE_LESSTHAN8LANE_SLAVE ( 1 << 10 ) /* CrossfireX can be enabled however performance not optimal due to <8 lanes */ |
|
#define | ADL_XFIREX_STATE_MASTERONSLAVE ( 1 << 5 ) /* Dongle is OK but master is on slave */ |
|
#define | ADL_XFIREX_STATE_MEMBANKSDOWNGRADED ( 1 << 23 ) /* Notification that memory banks are currently downgraded */ |
|
#define | ADL_XFIREX_STATE_MEMISDOWNGRADED ( 1 << 16 ) /* Notification that memory is currently downgraded */ |
|
#define | ADL_XFIREX_STATE_NODISPLAYCONNECT ( 1 << 6 ) /* No (valid) display connected to master card. */ |
|
#define | ADL_XFIREX_STATE_NOINTERCONNECT ( 1 << 0 ) /* Dongle / cable is missing */ |
|
#define | ADL_XFIREX_STATE_NONP2PMODE ( 1 << 21 ) /* CrossfireX will only work with clients supporting non P2P mode */ |
|
#define | ADL_XFIREX_STATE_NOPRIMARYVIEW ( 1 << 7 ) /* CrossfireX is enabled but master is not current primary device */ |
|
#define | ADL_XFIREX_STATE_P2P_APERTURE_MAPPING ( 1 << 25 ) /* P2P mapping was through peer aperture */ |
|
#define | ADL_XFIREX_STATE_P2PFLUSH_REQUIRED ADL_XFIREX_STATE_P2P_APERTURE_MAPPING /* For back compatible */ |
|
#define | ADL_XFIREX_STATE_PEERTOPEERFAILED ( 1 << 11 ) /* CrossfireX cannot be enabled due to failed peer to peer test */ |
|
#define | ADL_XFIREX_STATE_PIPESDOWNGRADED ( 1 << 17 ) /* Notification that pipes are currently downgraded */ |
|
#define | ADL_XFIREX_STATE_REVERSERECOMMENDED ( 1 << 3 ) /* Card reversal recommended, CrossfireX cannot be enabled. */ |
|
#define | ADL_XFIREX_STATE_VISMEMISDOWNGRADED ( 1 << 19 ) /* Notification that visible FB memory is currently downgraded */ |
|
#define | ADL_XFIREX_STATE_XFIREXACTIVE ( 1 << 18 ) /* CrossfireX is enabled on current device */ |
|
#define | ADL_XFIREX_STATE_XSP_CONNECTED ( 1 << 26 ) /* There is CrossfireX side port connection between GPUs */ |
|
#define | ADL_XSERVERINFO_RANDR12SUPPORTED (1<<1) |
|
#define | ADL_XSERVERINFO_XINERAMAACTIVE (1<<0) |
| These flags are used by ADL_XServerInfo_Get() More...
|
|
#define | ALD_DL_I2C_SPEED_400K 400 |
|
#define | ECC_MODE_HBM 3 |
| Error Correction is HBM. More...
|
|
#define | ECC_MODE_OFF 0 |
|
#define | ECC_MODE_ON 2 |
| Error Correction is ECCV2. More...
|
|
#define | MVPU_ADAPTER_0 0x00000001 |
|
#define | MVPU_ADAPTER_1 0x00000002 |
|
#define | MVPU_ADAPTER_2 0x00000004 |
|
#define | MVPU_ADAPTER_3 0x00000008 |
|
|
#define | ADL_ADAPTER_INDEX_ALL -1 |
| Defines for all adapters. More...
|
|
#define | ADL_FALSE 0 |
| Defines ADL_FALSE. More...
|
|
#define | ADL_MAIN_API_OPTION_NONE 0 |
| Defines APIs with iOption none. More...
|
|
#define | ADL_MAX_ADAPTERS 250 |
| Defines the maximum number of supported adapters. More...
|
|
#define | ADL_MAX_CHAR 4096 |
| Defines the maximum string length. More...
|
|
#define | ADL_MAX_DEVICENAME 32 |
| Defines the maxumum string length for device name. More...
|
|
#define | ADL_MAX_DISPLAYS 150 |
| Defines the maxumum number of supported displays. More...
|
|
#define | ADL_MAX_PATH 256 |
| Defines the maximum string length. More...
|
|
#define | ADL_TRUE 1 |
| Defines ADL_TRUE. More...
|
|
|
|
#define | ADL_DDC_OPTION_COMBOWRITEREAD 0x00000010 |
| Combine write-read DDC block access command. More...
|
|
#define | ADL_DDC_OPTION_RESTORECOMMAND 0x00000002 |
| Save command in the registry under a unique key, corresponding to parameter iCommandIndex. More...
|
|
#define | ADL_DDC_OPTION_SENDTOIMMEDIATEDEVICE 0x00000020 |
|
#define | ADL_DDC_OPTION_SWITCHDDC2 0x00000001 |
| Switch to DDC line 2 before sending the command to the display. More...
|
|
|
|
#define | ADL_DL_I2C_ACTIONIS_PRESENT 0x00000004 |
|
#define | ADL_DL_I2C_ACTIONREAD 0x00000001 |
|
#define | ADL_DL_I2C_ACTIONREAD_REPEATEDSTART 0x00000003 |
|
#define | ADL_DL_I2C_ACTIONWRITE 0x00000002 |
|
|
#define | ADL_BUSTYPE_AGP 1 /* AGP bus */ |
|
#define | ADL_BUSTYPE_PCI 0 /* PCI bus */ |
|
#define | ADL_BUSTYPE_PCIE 2 /* PCI Express bus */ |
|
#define | ADL_BUSTYPE_PCIE_GEN2 3 /* PCI Express 2nd generation bus */ |
|
#define | ADL_BUSTYPE_PCIE_GEN3 4 /* PCI Express 3rd generation bus */ |
|
#define | ADL_BUSTYPE_PCIE_GEN4 5 /* PCI Express 4th generation bus */ |
|
|
#define | ADL_FREESYNC_POWEROPTIMIZATION_DEFAULT_VALUE_MASK (1 << 2) |
|
#define | ADL_FREESYNC_POWEROPTIMIZATION_ENABLED_MASK (1 << 1) |
|
#define | ADL_FREESYNC_POWEROPTIMIZATION_SUPPORTED_MASK (1 << 0) |
|